Landlord approved the install but wants "no wall damage" — what setup actually keeps that promise?
Good news, my landlord actually signed off on putting in a 240V outlet for my new EV. Bad news, the amendment he had me sign is oddly specific — "no damage to interior walls or outlet plates," word for word. I'm guessing he's had a bad experience with a previous tenant's project because it's way more detailed than I expected for something this small.
I started digging into charger types after that and now I'm second-guessing the wall-mount unit I already had my eye on. Apparently the weight of some of these hardwired or plug-in wall chargers puts constant strain on the box and outlet plate over time, cord tension pulling down on it every time you unplug the car. Is a lighter, more portable unit where the bulk sits at the car end instead of hanging off the wall actually the safer move here, or am I overthinking a $30 plastic cover? Anyone dealt with a lease clause this specific?
Filed under: Renters, Apartments & HOA Charging
13
20 answers
20 ANSWERS
@picklewindowJuly 26, 2026
Had almost this exact clause in my last apartment lease. I went with a portable unit instead of a wall mount for basically this reason, two years in and the outlet looks brand new, no cracking, no play in the plate.
Can you say more about how yours is set up? Trying to picture what 'not hanging off the wall' actually looks like day to day.
Sure, mine's a portable unit where most of the weight sits at the plug end that goes into the car, not the wall end. I just coil the cord and set the unit itself on a little shelf near the outlet, so nothing is ever pulling on the plate or the box behind it. The outlet's just doing its one job, holding a plug, not bearing weight.
@gravelfox88July 27, 2026
Electrician here, this is a real thing. A hardwired or heavy plug-in wall unit puts constant torque on the box, especially if it's only screwed into the outlet's mounting yoke rather than anchored to the stud separately. Every time the cord flexes or someone yanks it, that force transfers straight to the plate and sometimes the receptacle terminals.
Seen this on jobs, contractor not electrician but I've pulled covers off outlets where a heavy EVSE was basically using the cover screw as its only support. Screws strip, plate cracks, sometimes the whole box shifts in the wall.
@wrenlee_kJuly 24, 2026
Can confirm from the renter side, my wall mount cracked the plastic cover plate just from cord tension over about a year and a half. Nothing dramatic, it just slowly worked itself loose and then one day the plate had a hairline crack across it.
That's exactly the scenario I'm scared of, thank you for confirming it's not just internet paranoia.
@duskravenJuly 24, 2026
Gonna push back a little, I think this is more of an install quality issue than a wall-mount-vs-portable issue. If the unit is mounted with its own bracket screwed into the stud and the cord isn't left to yank on the plug, a wall mount should be fine long term.
Partially agree, it does depend a lot on whether the charger has an actual separate wall bracket versus just relying on the outlet cover as an anchor point. Cheaper units especially do the latter.
Fair, that's a good distinction. Still, given OP's lease specifically calls out plate damage, seems like the lowest-risk option is the one that never puts any load on the plate at all, regardless of how careful the install is.
@frostbyte_742July 29, 2026
This exact 'no damage to plates' language has come up in a few threads here before. Generally the safest bet people land on is a plug-in portable that doesn't rely on the wall for structural support, rather than a hardwired or heavy wall-mount unit. Not legal advice, just what's generally been discussed, worth reading your specific amendment closely too.
Appreciate that, going to bring a portable option to my landlord and see if he's fine with the outlet install plus a portable unit instead of the hardwired charger I originally planned on.
@picklewindowJuly 24, 2026
One more upside worth mentioning, the car-end-heavy portables travel with you if you move. A wall mount basically becomes a parting gift to your landlord or the next tenant whether you want it to or not.
That's underrated honestly. I left my old wall mount behind for the next tenant because ripping it out felt like more hassle than it was worth. Wish I'd gone portable from the start.
@tinycabinetJuly 24, 2026
is there a rule of thumb for how much weight is too much for a regular outlet box to handle long term
No universal number — depends on the anchor type and the box's own rating, not just the charger's weight. A standard old-work box rated for a ceiling fan is a reasonable proxy for what a light switch plate should handle; a 40A charger is well past that.
@dutch_b74July 24, 2026
Side note unrelated to the wall damage thing, make sure whatever outlet gets installed is on its own dedicated breaker, not shared with anything else in the garage. Doesn't fix your plate question but it's the other half of doing this right.
Good call, I'll confirm that with the electrician when he comes out for the outlet.
The dedicated-breaker point above is the one worth not skipping — shared circuits cause a lot more nuisance trips and wear over time than anything about the charger's weight itself.
@bluehazel_31September 04, 2026
I've had an outdoor Level 2 for four years now — zero wall issues, but mine's a hardwired unit mounted straight to the stud from day one. If your landlord's this specific about damage, ask the installer to confirm stud placement before anything goes on the wall, not after.
Delete post?
Once you delete this post, it can't be restored.